SVS-Vistek CameraLink svs11002, Руководство пользователя

Страница: 7 / 47

Users Manual Area Scan Cameras svs11002 and svs16000 Page 7
2.4 “CameraLink” Connector
26 Pin connector MDR female (3 M): Base configuration with RS 232 communication
Pin Name Direction Meaning
1 GND
2 X 0- Camera=>FG Data
3 X 1- Camera=>FG Data
4 X 2- Camera=>FG Data
5 Xclk- Camera=>FG Transmitterclock/PVAL
6 X3- Camera=>FG Data
7 Ser TC+ FG => Camera Camera control (RS232)
8 SerTFG- Camera=>FG Camera control (RS232)
9 CC1- FG => Camera Exsync
10 CC2+ FG => Camera Prin (not used)
11 CC3- FG => Camera External camera clock
12 CC4+ FG => Camera NC
13 GND
14 GND
15 X 0+ Camera=>FG Data
16 X 1+ Camera=>FG Data
17 X2+ Camera=>FG Data
18 Xclk+ Camera=>FG Transmitterclock/PVAL
19 X3+ Camera=>FG Data
20 SerTC- FG => Camera Camera control (RS232)
21 Camera=>FG Camera control (RS232)
22 CC1+ FG => Camera Exsync
23 CC2- FG => Camera Prin (not used)
24 CC3+ FG => Camera External camera clock
25 CC4- FG => Camera NC
26 GND
Camera has a “BASE” configuration according to CameraLink definition.
However, the output of the Kodak KAI 11002/16000 CCD is configured as a
two tap for “T”,“F” and “U” version (11002 currently only).
2.5 Installation
1) Install camera in the desired location. You can use the ¼ “ tripot adapter or use the 4 xM3
holes in the front plate of the camera.
2) Connect the power supply. If you have ordered a P/S, connect it to the 3 pin connector
on the camera. If you use your own power supply (must be 12V DC) make sure you connect
it to Pin1 (+12V) and pin 3 (GND).
If you – by mistake – supply line with GND pin the
camera can be damaged! If power supply was ordered, do not modify it.
Connect a CameraLink cable to your framegrabber. Please note that cable length should not
exceed 10 m for theses camera (“F” version and higher clocked cameras). A
REPEATER is
available to extend cable length. Consult your local distributor!