SVOA C4805, Руководство пользователя

Страница: 90 / 200

BIOS Utilities
5 - 2 The Power-On Self Test (POST)
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to conduct a
POST , including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run
Setup .
If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can’t get into Setup without rebooting.
POST Screen
1. BIOS information
2.CPU type
3.Memory status
4.Enter
Setup prompt
appears only during
POST
Note: The POST screen
as pictured right is for
guideline purposes only.
The
POST screen on
your computer may ap-
pear slightly different. If
you disable the
Boot-
time Diagnostic Screen ,
the POST screen will not
appear.
Figure 5 - 1
POST Screen
1
2
3
4