ENG
6
Multimedia Speaker System 2.1
10. TROUBLE SHOOTING
If none of the above methods can not solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of
sound.
Sound is produced
by one of the
channels only.
Remote control is
not working.
Cause
MSS is not connected to the mains outlet.
Power switch is o
ff
.
Volume level is set at minimum value.
Improperly connected audio source.
Volume level is set at minimum value.
Large amplitude of the input signal.
Improperly connected speakers to audio
source.
The battery is discharged.
There is direct sunlight.
Obstacle between remote control and
subwoofer receiver.
Solution
Check the connection.
Turn on the switch.
Adjust volume control knob.
Connect audio sources correctly.
Adjust volume control knob.
Turn down source volume
and MSS volume.
Check the connection of
speakers.
Change battery for new one.
Change location of subwoofer or
remote control.
Change the subwoofer or remote
control location.
•
Adjust bass level by turning BASS control knob
a
on the front panel of subwoofer or by pressing
buttons SUB+ or SUB-
c
on remote control.
•
MUTE feature allows to turn o
ff
/on sound of speaker system. To turn on sound, press MUTE
button
a
on remote control.
Notes:
• If speaker system has not been used for a long time, please mind to switch off POWER
i
(position OFF) on subwoofer rear panel and pull out its plug
j
from the socket.
• To enhance sound quality, use Line-Out output of sound card.
