Svantek SVAN 979 Скачать руководство пользователя страница 77

Страница: 77 / 377

SVAN 979 User Manual

6.1.8

Erasing all files in a memory

– Delete All

You can delete all elements from the
memory. To do this, select the desired
memory (

SD Card

USB Disk

) and press

<ENTER>

. Select the

Delete All

position in

the command list and press

<ENTER>

The instrument will ask for confirmation of
this operation.

<ENT>

All files and directories in this memory will be
erased. After this operation three directories
will be created as default directories:

SETUP

SVANTEK

and

SYSTEM

<ENT>

6.2 M

ANAGING THE SETUP FILES

–

ETUP

ANAGER

Setup Manager

enables saving new setup

files, deleting, renaming or loading them.

All setup files are stored in the default

SETUP

directory on the SD card.

<ENT>

Saving setup files

It  is  possible  to  save  only  current
instrument’s  settings.  To  save  current
settings  in  the  setup  file,  select  the

<Save Setup>

position

and

press

<ENTER>

<ENT>

You can edit the setup file name in the editor
screen. Press

<ENTER>

to confirm edition.

Up to 8 characters can be used to name a
setup file.

<ENT>

Opening setup files

Opening the setup file means that the
settings saved in this file will be loaded to the
instrument's flash memory. So, if you press
the

<Start/Stop>

key the instrument will

start the measurement with the newly
loaded settings.

After loading the setup file, the instrument
will be reconfigured.

<ENT>

Copying, moving, renaming, info viewing and deleting setup files is performed in the same way as files from
the

File Manager

list.

Содержание SVAN 979

























































































































































































































































































































































































Результаты поиска

Содержание SVAN 979

Отзывы:

Бренды по названию

Популярные бренды

Svantek SVAN 979, Руководство пользователя

Результаты поиска

Содержание SVAN 979

Отзывы:

Бренды по названию

Популярные бренды