SV 258 PRO User Manual
23
2. Insert a mini SIM-card into the slot of the modem. The
SIM-card PIN protection must be disabled.
3. A click sound indicates that the SIM-card is in the right
position. If necessary, use a tool (e.g. pen) to push the
SIM-card fully in.
4. Press
<Alt>+<Start>
on SVAN 958A to turn on the
system.
The station is programmed to automatically establish a mobile
connection with the SvanNET webservice. It takes up to 5
minutes to connect.
The most important parameter of the connection is the
APN
(Access Point Name).
5. Check the APN setting in SVAN 958A.
The default APN setting is "
internet
". It’s possible that your
Internet provider is using a different APN. In this case the APN
must be entered manually, either using the + software
or the SVAN 958A user interface (
path: <Menu> / Setup /
Wireless Com. / Modem Connection / APN
).
Note: The station is supplied with SVAN 958A configured for connection with SvanNET. If for
some reasons you have changed factory settings, you always may restore them with the use
of Factory Settings option.
Note:
If above steps don’t result in connection with SvanNET or you wish to connect to the
other server, you have to configure remote communication parameters in your SVAN 958A
according to the SVAN 958A User Manual. In the case of further problems consult your local
distributer or SVANTEK.
3.5 A
SSEMBLING THE STATION
1. The system consists of two carrying cases. Before the
use check the serial numbers on labels located on the
front side of both cases and ensure they are a matching
set.
