Svantek SV 973, Руководство пользователя

Страница: 70 / 212

SVAN 973 User Manual 70
LEQ detector
Following LEQ detectors are available in the instrument: Imp. , Fast and Slow .
Dosimeter specific parameters can be set in accordance with the OSHA HC
(Occupational Safety and Health Administration - Hearing Conversation),
OSHA PEL (Occupational Safety and Health Administration
– Permissible
Exposure Level) and ACGIH standards.
Criterion Level is a steady noise level permitted for a full eight-hour work shift :
60dB , 65dB , 70dB , 75dB , 80dB , 84dB , 85dB , 87dB , 90dB ;
Threshold Level is a noise level limit below which the dosimeter does not
accumulate noise dose data : None , 60dB , 65dB , 70dB , 75dB , 80dB , 85dB ,
90dB ;
Exchange Rate is an amount by which the permitted sound level may increase if
the exposure time is halved : 2 , 3 , 4 , 5 , 6 ;
ULT Threshold Level (Upper Level Time) is a threshold level for calculation of
the ULT results: 70dB
÷
140dB ;
PTC Threshold Level (Peak Threshold Counter) is a threshold level for
calculation of the PTC results: 70dB
÷
140dB .
11.4 C
HECKING MEASUREMENT RANGE
–
R
ANGE
The measurement range for the Dosimeter function is
50.0 LEQ(A)
– 141.0 PEAK. The detailed description of
the measurement range parameters is given in
Appendix C.
The calibration factor is always added to the lower and
upper range level.
<ENT>
11.5 S
ETTING EXPOSURE TIME
–
E
XPOSURE
T
IME
The Exp. Time enables setting the desired value of the
workday exposure time which is used for calculation of
the
LEPd results (see Appendix D).
<ENT>
11.6 S
ETTING ALARM THRESHOLDS FOR DOSE METER RESULTS
–
A
LARM
The Alarm position is active only in the Dosimeter
function and enables programming the alarm thresholds
for three profiles (
Thresh. P1 (2,3) ).
Thresholds can be set for next measurement results of
the
Dosimeter in ranges:
DOSE
: 1÷200%;
<ENT>
D_8h
: 1÷200%;
PTC
: 1÷1000;
ULT
: 1÷60s.
If Off is selected, the alarm for the measurement result is
switched off.
<ENT>