Svantek SV 971A Скачать руководство пользователя страница 48

Страница: 48 / 305

SV 971A User Manual

5 CONFIGURING DATA VIEWING

– Display

The

Display

section contains elements for programming

measurement result views and display parameters.

The content of the

Display

list depends on the selected

measurement function.

To open the

Display

section, press the

<Menu>

key,

select the

Display

position and press

<Enter>

<ENT>

The

Display

section contains following items:

Disp. Modes

allowing you to enable modes of the measurement results presentation (views);

Disp. Scale

allowing you to adjust the

Logger

and

Spectrum

views;

Spect. View

allowing you to select spectra to be viewed. This position becomes available only in
the 1/1- and 1/3-octave analysis functions;

Meas. Res.

allowing you to select measurement results to be displayed;

Logger Res.

allowing you to select time history results to be viewed as a plot;

Screen Set.

allowing you to switch rotation of the screen on/off and set the energy saver function.

5.1 E

NABLING VIEWS

–

ISPLAY

ODES

The One Result view is always enabled. Other views can
be enabled or disabled in the

Display Modes

screen.

You may switch in the measurement mode between
those views, that were enabled in the

Disp. Modes

screen.

<ENT>

In the

Level Meter

function, following views are available:

3 Profiles

Statistics

Logger

Running SPL

and

File Info

In the analyser functions, additional view (

Spectrum

) becomes available.

Changing views

The view can be changed with the

▲

▼

key pressed

with

<Shift>

or with the

<ESC>

key.

<Sh>/

▲

5.1.1 One Result view

In the One Result view, any
measurement result, selected in
the

Disp. Res

list, may be viewed.

The  One Result  view  may  have
different  sub-views.  You  may
change  the  sub-view  of  the  One
Result view by pressing

<Enter>

<ENT>

Содержание SV 971A

















































































































































































































































































































Результаты поиска

Содержание SV 971A

Отзывы:

Бренды по названию

Популярные бренды

Svantek SV 971A, Руководство пользователя

Результаты поиска

Содержание SV 971A

Отзывы:

Бренды по названию

Популярные бренды