SV 277 PRO User Manual
27
The most important parameter of the connection is the
APN
(Access Point Name).
5. Check the APN setting in SVAN 977.
The default APN setting is "
internet
". It’s possible that
your Internet provider is using a different APN. In this
case the APN must be entered manually, either using
the + software or the SVAN 977 user interface
(
path: <Menu> / Instrument / Wireless Transfer /
Modem Connection
).
Note: The station is supplied with SVAN 977 configured for connection with SvanNET. If for
some reasons you have changed factory settings, you always may restore them with the use of
Factory Settings option.
Note:
If above steps don’t result in connection with SvanNET or you wish to connect to the
other server, you have to configure remote communication parameters in your SVAN 977
according to the SVAN 977 User Manual. In the case of further problems consult your local
distributer or SVANTEK.
3.5. A
SSEMBLING THE STATION
1. The system consists of 2 carrying cases. Before
use check the serial numbers on labels located on
the side of both cases and ensure they are a
matching set.
2. Open the case with accessories and take out the
SA 277 outdoor microphone kit.
3. Mount the SA 277 on a
tripod (not included) or
other stable support.
