Svantek SV 200A, Руководство пользователя

Страница: 56 / 198

56 SV 200A User Manual
8 SVANNET WEB-SERVICE
When enabled, and the instrument is properly configured, SvanNET Web - service offers you simple
access to the instrument’s settings, results and status information.
To start use SvanNET the user should browse https://svannet.com and log-in on it.
Note: To have access to the SvanNET web-service the local SVANTEK distributer should
create the user’s account and assign monitoring stations to it.
The SvanNET interface depends on the package of tools assigned to your account and access level and
includes:
– projects tools (
Project list )
– individual stations tools (
Station list ).
If you have extended SvanNET package, you can use both tools. If you have standard SvanNET package,
only Station list tool is available.
Note: This manual describes only the Station list tools. To get more information about Project
list see SvanNET User Manual.
8.1 S
TATION LIST VIEW
Station list displays all stations assigned to your account
– turned on and off. When you click the station,
it becomes active and the tools at the right panel will be dedicated to this particular station.
If the selected station is turned off clicking one of the buttons in the right-side panel you can check the
station status (
STATUS ) and open three logs: CONNECTION LOG , STATUS LOG and
DATA TRANSFER LOG .
If you click the left field of the grey bar the label with station information appears.
If the selected station is turned on you can additionally open the WEB-interface (by pressing the
WEB INTERFACE button) from which you can control the station and configure it.