Svantek SV 200A, Руководство пользователя

Страница: 142 / 198

142 SV 200A User Manual
13 RainPeakIntens Rain Peak Intensity [mm/h]
14 HailAcc Hail Accumulation [hits/cm2]
15 HailDuration Hail Duration [s]
16 HailIntens Hail Intensity [hit/(cm2*h)]
17 HailPeakIntens Hail Peak Intensity [hit/(cm2*h)]
18 0xC9nn nn = size of records
… … …
B.2.9 Record with system check data
Word
number
Name Comment
0 0xC701 record ID (start)
1 Length length of the block together with IDs, [words]
2 Type
system check type:
4 - system check (built-in actuator)
3 Date date of the performed system check
4 Time time of the performed system check
5 Result
result of the system check:
0 - failed
1 - OK
6 Factor system check factor, [*100 dB]
7 Level measured level of system check, [*100 dB]
8 PreBackGround
maximum level of the background noise measured before actuator
was turned on, [*10 dB]. This is a maximum value of three 1s
measurements of RMS(C)
9 PostBackGround
maximum level of the background noise measured after actuator
was turned off, [*10 dB]. This is a maximum value of three 1s
measurements of RMS(C)
10 Assigned
was the result of the system check assigned to calibration factor?
0 - No
1 - Yes
11 Length length of the block together with IDs, [words]
12 0xCF01 record ID (end)
… … …
B.2.10 Record with remote marker data
Word
number
Name Comment
0 0xC702 record ID (start)
1 Length length of the block together with IDs, [words]
2 MarkerNr
Number of the marker (1-16, 0 - end of all block markers when
MarkerType=2)
3 MarkerType
Type of the marker:
0 - point
1 - block (start)
2 - block (end)