Svantek SV 104BIS, Руководство пользователя

Страница: 63 / 180

63 SV 104BIS User Manual
6.3.7 VIEW configuration
As mentioned in Chapter 3.10 there are quite a few VIEW modes accessible on the display, when
the dosimeter is performing a measurement run.
•
In the left panel named
“Modes
& V
iews”
you can select which VIEW mode will be present when
you press the key on the dosimeter keypad.
Note: If you do not want to use all three ACOUSTIC PROFILES it would be convenient for you to
enable only one acoustic PROFILE to be displayed
–
just select the required one.
Note:
The “ONE
-
RESULT” (Chapter
3.10.2 ) is the only VIEW mode that is always present and cannot
be disabled.
•
In the right panel named
“Display Results”
, you will find a list of over a dozen
measurement parameters, that can be configured to be presented on the SV 104BIS display, when
you press key. See Appendix D to review acronyms for each parameter.
Figure 6-14 Display VIEW configuration tab
Up to three
profiles can be
switched on
Screen saving
mode can be
activated