Svantek SV 104BIS, Руководство пользователя

Страница: 33 / 180

33 SV 104BIS User Manual
4
RUNNING AND OPERATING BASIC PROCEDURES
4.1 C
HARGING
SV 104BIS
SV 104BIS can be charged only with the use of docking station for a single unit (1-bay docking station
SB 104B-1 ) or for five units (5-bays docking station SB 104B-5 ).
Both docking stations are equipped with the USB Type B connector and can be connected with a PC for data
transfer with the
SC 16 cable. SB 104B-1 is also powered via the USB port whilst SB 104B-5 is powered by
the SB 33 power supply (9V AC/DC).
Figure 4-1 1-bay and 5-bay docking station (SB 104B-1 and SB 104B-5)
To charge SV 104BIS place it onto the docking station charger and ensure the power cable is connected.
SV 104BIS will automatically turn on the display during charging and present how much charge is within the
instrument. SV 104BIS will
display ‘
Charging completed
’ once charging is complete
d. This should take
approximately 7 hours from a fully discharged state. A charging time of about 2 hours will be sufficient to
perform greater than 10 hours of measurement. A fully charged instrument holds enough charge to run for
approximately 45 hours.
Note that once disconnected from the docking station, the dosimeter will automatically switch off. If put again
onto the docking station the internal battery is float charged. This keeps the battery performance in steady
condition. If the battery is fully discharged prior to being placed on a charger, it trickles charges for a maximum
1h time prior to the fast charge cycle, this prevents damage to the batteries.
Docking stations are equipped with the LED. Table below describes LED statuses of the Docking Station.
Charger LED status indication Description
SB 104B-1
OFF Dock station is not powered on
GREEN Indicates the dock station is powered on and fully operational
RED Dock station is powered on, but not fully operational
RED flashing quickly,
2 times per second
Charging error
–
ambient air temperature limit exceeded
SB 104B-5
LED on the top
OFF Dock station is not powered on
GREEN Indicates the dock station is powered on and fully operational
RED Dock station is powered on, but not fully operational
SB 104B-5
LED on the side
RED flashing quickly,
2 times per second
Charging error
–
ambient air temperature limit exceeded
Table 4-1 Docking station LED status description