Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
46
Seats and Restraints
auto-heated and ventilated seats feature can
be programmed to always be enabled when
the vehicle is on.
If equipped with a heated steering wheel,
the auto heated steering wheel activation
will follow the heated seat auto activation
and the heated wheel indicator will follow
the state of the steering wheel heat.
Remote Start Heated and Ventilated Seats
During a remote start (if equipped), the
heated or ventilated seats can be turned on
automatically. When it is cold outside, the
heated seats turn on, and when it is hot
outside the ventilated seats turn on. The
heated and ventilated seat indicators and
heated steering wheel indicator may come
on during this operation. The heated or
ventilated seats are cancelled when the
ignition is turned on. Press the heated or
ventilated seat button to use the heated or
ventilated seats after the vehicle is started.
The temperature performance of an
unoccupied seat may be reduced. This is
normal.
The heated or ventilated seats may turn on
during a remote start unless they are
disabled in the vehicle personalisation menu.
See
and
Seat Belts
How to Wear Seat Belts Properly
{
Warning
Seat belts are designed to bear upon the
bony structure of the body, and should
be worn low across the front of the
pelvis or the pelvis, chest and shoulders,
as applicable; wearing the lap section of
the belt across the abdominal area must
be avoided.
Seat belts should be adjusted as firmly as
possible, consistent with comfort, to
provide the protection for which they
have been designed. A slack belt will
greatly reduce the protection afforded to
the wearer.
(Continued)
Warning (Continued)
Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid.
Belts should not be worn with straps
twisted.
Each belt assembly must only be used by
one occupant; it is dangerous to put a
belt around a child being carried on the
occupant's lap.
No modifications or additions should be
made by the user which will either
prevent the seat belt adjusting devices
from operating to remove slack,
or prevent the seat belt assembly from
being adjusted to remove slack.
The seat belts are locked during heavy
vehicle acceleration or deceleration, holding
the occupants in the seat. Thereby the risk
of injury is considerably reduced. Fasten the
seat belt before each trip.
Periodically check all parts of the seat belt
system for damage, soiling and correct
functionality. Ensure they draw out
