Suzuki VLR1800, Руководство по обслуживанию

Страница: 290 / 624

1D-79 Engine Mechanical:
• Install the gearshift shaft assembly (8) and washers
(9) as shown in the figure.
NOTE
Pinch the gearshift arm stopper (7) with
return spring ends “D”.
• Install the dowel pins and gasket (9).
CAUTION
!
Use a new gasket to prevent oil leakage.
• Tighten the gearshift cover bolts.
NOTE
• Apply grease to the oil seal lip before
installing the gearshift cover.
• Fit the clamp “E” and stay “F” to the bolts.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Secondary Driven Gear
• Install the shims (1) onto the secondary driven gear
case. Refer to “Secondary Gear Shim Inspection and
Adjustment in Section 3A (Page 3A-10)”.
• Apply engine oil to the O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
• Tighten the secondary driven gear case bolts (2) to
the specified torque.
Tightening torque
Secondary driven gear case bolt (a): 26 N·m (2.6
kgf-m, 19.0 lb-ft)
7
“D”
8
9
I822H1140260-02
9
I822H1140261-03
“E”
“F”
I822H1140262-02
1
I822H1140263-03
(a)
2
(a)
2
I822H1140264-01