Suzuki VLR1800, Руководство по обслуживанию

Страница: 252 / 624

1D-41 Engine Mechanical:
• Apply engine oil to the new O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
• Tighten the generator cover plug (4) and valve timing
inspection plug (5) to the specified torque.
Tightening torque
Generator cover plug (a): 16 N·m (1.6 kgf-m, 11.5
lb-ft)
Valve timing inspection plug (b): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
• Install the generator cover cap (6).
NOTE
The sharp edge of the washer faces “A”
outside.
Cylinder Head Cover
• Pour engine oil in each oil pocket in the cylinder
heads.
• Install a new gaskets to the cylinder head covers.
CAUTION
!
Use new gaskets to prevent oil leakage.
• Apply bond to the cam end caps of the gaskets as
shown in the figure.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
• Place the cylinder head covers on the cylinder heads.
• Fit new gaskets (1) to each head cover bolts.
CAUTION
!
Use the new gaskets to prevent oil leakage.
(b)
5
(a)
4
I822H1140106-01
6
“A”
I822H1140107-03
I822H1140401-01
I822H1140108-01
1
I822H1140109-04