Suzuki TU250X, Руководство по обслуживанию

Страница: 147 / 370

4-26 FI SYSTEM DIAGNOSIS
MALFUNCTION CODE AND DEFECTIVE CONDITION
DTC No.
DETECTED
ITEM
DETECTED FAILURE CONDITION CHECK FOR
00 NO FAULT ––––––––––– –––––––––––
12
CKP sensor The CKP sensor signal does not reach
ECM for 3 seconds or more, after
receiving the starter signal. CKP sensor wiring and mechan-
ical parts
CKP sensor, lead wire/coupler
connection
P0335
13
IAP sensor The sensor should produce following
voltage.
0.24 V sensor voltage < 4.1 V
In other than the above range, 13
(P0105) is indicated.
IAP sensor, lead wire/coupler
connection
P0105
H
Sensor voltage is higher than specified
value. IAP sensor circuit open or
shorted to VCC or ground circuit
open
L
Sensor voltage is lower than specified
value. IAP sensor circuit shorted to
ground or VCC circuit open
14
TP sensor The sensor should produce following
voltage.
0.35 V sensor voltage < 4.9 V
In other than the above range, 14
(P0120) is indicated.
TP sensor, lead wire/coupler
connection
P0120
H
Sensor voltage is higher than specified
value. TP sensor circuit shorted to
VCC or ground circuit open
L
Sensor voltage is lower than specified
value. TP sensor circuit open or
shorted to ground or VCC circuit
open
15
ET sensor The sensor voltage should be the fol-
lowing.
0.1 V sensor voltage < 4.7 V
In other than the above range, 15
(P0115) is indicated.
ET sensor, lead wire/coupler
connection
P0115
H
Sensor voltage is higher than specified
value. ET sensor circuit open or ground
circuit open
L
Sensor voltage is lower than specified
value. ET sensor circuit shorted to
ground
21
IAT sensor The sensor voltage should be the fol-
lowing.
0.15 V sensor voltage < 4.85 V
In other than the above range, 21
(P0110) is indicated.
IAT sensor, lead wire/coupler
connection
P0110
H
Sensor voltage is higher than specified
value. IAT sensor circuit open or
ground circuit open
L
Sensor voltage is lower than specified
value. IAT sensor circuit shorted to
ground