background image

Keys, doors and windows

39

Electric adjustment

Switch on ignition to operate electric

exterior mirrors.
Select the relevant exterior mirror and

swivel the control to adjust the mirror.
No mirror is selected when the control

is in the centre position.
The lower mirrors are not adjustable.

Folding mirrors

For pedestrian safety, the exterior

mirrors will swing out of their normal

mounting position if they are struck

with sufficient force. Reposition the

mirror by applying slight pressure to

the mirror housing.

Parking position

The exterior mirrors can be folded in

by pressing gently on the outer edge

of the housing, e.g. when in a

confined parking situation.

Heated mirrors

Operated by pressing 

Ü

 on either

system. LED illuminates in button

during operation.

Heating works with the engine

running and is switched off

automatically after a short time.
Climate control system 

3

 208.

Electronic climate control system

3

 210.

Содержание Movano


































































































































































































































































































































































Отзывы: