Suzuki Movano Скачать руководство пользователя страница 138

Страница: 138 / 353

136

Infotainment system

Phone favourites

Select an empty slot in the display or

touch

(to open a pop-up menu),

then Add Favourite.
Choose from the displayed list to add

a phone contact to the favourites.
For further information, refer to

(NAVI 80 IntelliLink) "Phonebook" in

the "Phone" section

201.

Services favourites

Select an empty slot in the display or

touch

(to open a pop-up menu),

then Add Favourite.
Choose from the displayed list to add

a service item to the favourites.
Delete favourites

Touch

and select Remove all

Favourites or Remove a Favourite.
Then select a favourite from the

displayed list. A confirmation

message is displayed. Touch Delete

and confirm if prompted.

Additional features

(NAVI 50 IntelliLink)

Depending on version, rear camera

view settings are available.

Rear camera view settings

When the rear camera view is shown

on the display, touch

to open the

settings menu.
The following settings can be

updated:

● Switch the rear camera view

display Off/On.

● Colours

Touch

]

to adjust level.

● Brightness

Touch

]

to adjust level.

● Contrast

Touch

]

to adjust level.

For further information, refer to "Rear

view camera" section in the vehicle

Owner's Manual.

Touch operation overview

The Infotainment system display

(NAVI 50, NAVI 80 IntelliLink) has a

touch-sensitive surface that allows

direct interaction with the displayed

menu controls.

Caution

Do not use pointed or hard items

like ballpoint pens, pencils or

similar for touchscreen operation.

Selecting or activating a screen

button or menu item

Touch a screen button or menu item.

● A short touch activates the

selected item.

● Touch and hold to save a

selected item.

The corresponding system function is

activated, a message is shown, or a

submenu with further options is

displayed.

Note

In subsequent chapters, the

operating steps for selecting and

activating a screen button or menu

item via the touch screen will be

described as "...select <button

name>/<item name>".

Содержание Movano


































































































































































































































































































































































Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды

Suzuki Movano, Руководство пользователя

Результаты поиска

Содержание Movano

Отзывы:

Бренды по названию

Популярные бренды