Suzuki Intruder VZ1500, Руководство по обслуживанию

Страница: 442 / 580

3A-28 Drive Chain / Drive Train / Drive Shaft:
Specifications
Service Data
B940H23107001
Drive Train
Unit: mm (in) Except ratio
Tightening Torque Specifications
B940H23107002
NOTE
The specified tightening torque is described in the following.
“Secondary Gear Components (Page 3A-2)”
“Secondary Gear Construction (Page 3A-3)”
“Final Bevel Gear Components (Page 3A-11)”
“Final Gear Construction (Page 3A-12)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-8)”.
Item Standard Limit
Primary reduction ratio 1.407 (76/54) —
Final reduction ratio 3.137 (20/17 x 32/12) —
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lbf-ft
Secondary gear case bolt (Initial)
15 1.5 11.0
) (Page 3A-4) /
) (Page 3A-9)
Secondary driven gear bearing housing bolt 55 5.5 40.0 ) (Page 3A-4)
Secondary gear case bolt (Final)
26 2.6 19.0
) (Page 3A-4) /
) (Page 3A-9)
Secondary driven bevel gear bearing stopper 105 10.5 76.0 ) (Page 3A-7)
Secondary bevel gear coupling nut 95 9.5 68.5 ) (Page 3A-8)
Final gear case nut 40 4.0 29.0 ) (Page 3A-13)
Final gear case bolt (M8)
23 2.3 16.5
) (Page 3A-18) /
) (Page 3A-24) /
) (Page 3A-26)
Final gear case bolt (M10)
50 5.0 36.0
) (Page 3A-18) /
) (Page 3A-24) /
) (Page 3A-26)
Final drive bevel gear bearing stopper 110 11.0 79.5 ) (Page 3A-19)
Final drive gear coupling nut 100 10.0 72.5
)
(Page 3A-20)