Suzuki Intruder VZ1500, Руководство по обслуживанию

Страница: 266 / 580

1D-77 Engine Mechanical:
2) Check the corresponding crank pin O.D. code
numbers ([1], [2] or [3]) “B”.
3) Measure the conrod crank pin O.D. with the special
tool. If any of the measurements are out of
specification, replace the crankshaft.
Crank pin O.D. specification
Special tool
(A): 09900–20203 (Micrometer (1/100 mm,
50 – 75 mm))
4) Select the specified bearings from the bearing
selection table.
CAUTION
!
The bearings should be replaced as a set.
Bearing selection table
Bearing thickness specification
Crankshaft Bearing Inspection and Adjustment
B940H21406038
Refer to “Engine Bottom Side Disassembly (Page 1D-
56)” and “Engine Bottom Side Assembly (Page 1D-64)”.
Inspection
1) Inspect the crankshaft bearings for any damage.
Code “B” O.D. specification
1
54.992 – 55.000 mm
(2.1650 – 2.1654 in)
2
54.984 – 54.992 mm
(2.1647 – 2.1650 in)
3
54.976 – 54.984 mm
(2.1644 – 2.1647 in)
“B”
I940H1140322-04
(A)
I940H1140269-01
Conrod
I.D. “A”
”
Code
1
2
1
Green
Black
2
Black
Brown
3
Brown
Yellow
Crank pin O.D. “B
I718H1140293-01
Color “C” (Part No.) Thickness
Green
(12164-40H00-0A0)
1.480 – 1.484 mm
(0.0583 – 0.0584 in)
Black
(12164-40H00-0B0)
1.484 – 1.488 mm
(0.0584 – 0.0586 in)
Brown
(12164-40H00-0C0)
1.488 – 1.492 mm
(0.0586 – 0.0587 in)
Yellow
(12164-40H00-0D0)
1.492 – 1.496 mm
(0.0587 – 0.0589 in)
“C”: Color code
“C”
I649G1140336-02
I940H1140270-01