24
FRONT SUSPENSION
Checking spring setting
Make sure the spring setting of the front suspension is
correct.
The standard setting for this motorcycle is as indicated
in the table below.
#
A: Adjuster
REAR SUSPENSION
Checking spring setting
Make sure the spring setting of the rear suspension is
correct.
The standard setting of this motorcycle is as indicated
in the table below.
A: Adjuster
Rebound Damping Force Adjustment
Adjust the setting of the rebound damping force to the
standard position.
To adjust, turn the adjuster
B
clockwise until it stops
and then turn it counterclockwise until approximately
1-1/4 turns are felt and the two punch marks align.
#
Standard setting
Position 3
Check that right and left spring settings are in
the same position.
Standard setting
Position 4
Do not force the adjuster screw
B
past the
stopped position or you may damage the
adjuster.
