5-42 CHASSIS
• Tighten the swingarm pivot nut to the specified torque.
&
Swingarm pivot nut: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
After installing the rear wheel, adjust the following before riding.
DRIVE CHAIN..........................................................
!
2-12
TIRE.........................................................................
!
2-17
SUSPENSION SETTING
REAR SHOCK ABSORBER SPRING SETTING
• Turn the adjuster
1
to obtain the spring length
A
of 269.4
mm (10.6 in).
• Tighten the lock ring
2
to the specified torque.
&
Rear shock absorber lock ring:
45 N·m (4.5 kgf-m, 32.5 lb-ft)
SPRING SETTING TABLE
Spring preset length
A
DR-Z125
DR-Z125/L
Soft
263.7 mm (10.4 in)
261.1 mm (10.3 in)
Standard
240.5 mm (9.47 in)
241.1 mm (9.49 in)
Hard
228.3 mm (9.0 in)
234.2 mm (9.2 in)
Содержание DR 125
