Suzuki Carry Pro Скачать руководство пользователя страница 71

Страница: 71 / 240

3-6

OPERATING YOUR VEHICLE

52SS0-01E

Brake Pedal (2)

Your vehicle is equipped with front disc

brakes and rear drum brakes. Depressing

the brake pedal applies both sets of

brakes.
You may hear occasional brake squeal

when you apply the brakes. This is a nor-

mal condition caused by environmental

factors such as temperature, humidity or

dust, etc.

Accelerator Pedal (3)

An accelerator pedal controls the speed of

the engine. Depressing the accelerator

pedal increases power output and speed.

Starting the Engine

Before Starting Engine

52SS30010

1) Make sure the parking brake is set fully.

2) Shift into “N” (Neutral). Hold the clutch

pedal and brake pedal fully depressed.

WARNING

Do not drive with your foot resting on

the clutch pedal. It could result in

excessive clutch wear, clutch dam-

age, or unexpected loss of engine

braking.

WARNING

• If brake squeal is excessive and

occurs each time the brakes are

applied, you should have the

brakes checked by a SUZUKI

dealer or a qualified workshop.

(Continued)

WARNING

(Continued)

• Do not apply brakes continuously

or rest your foot on the brake

pedal. This will result in overheat-

ing of the brakes which could

cause unpredictable braking

action, longer stopping distances,

or permanent brake damage.

WARNING

Make sure that the parking brake is

set fully and the transmission is in

Neutral before attempting to start the

engine.

Содержание Carry Pro

















































































































































































































































Результаты поиска

Содержание Carry Pro

Отзывы:

Бренды по названию

Популярные бренды

Suzuki Carry Pro, Руководство пользователя

Результаты поиска

Содержание Carry Pro

Отзывы:

Бренды по названию

Популярные бренды