manualshive.com logo in svg

Suunto AMBIT3 PEAK 2.0, Руководство пользователя, Страница: 24 / 139

Поделиться
Скачать
Suunto AMBIT3 PEAK 2.0 Скачать руководство пользователя страница 24

10 seconds. The altitude reading remains steady and if the weather
changes, you will see changes in the sea level air pressure reading.
If you are moving in altitude (more than 5 meters of vertical
movement within 3 minutes), Suunto Ambit3 Peak interprets all
pressure changes as movements in altitude.
Depending on which profile is active, you can access the 

Altimeter

or 

Barometer

 profile views with [View].

 NOTE:

 When you are using the 

Automatic

 profile, barometer or

altimeter icons are not shown on the display.

3.3  Autopause

Autopause

 pauses the recording of your exercise when your speed

is less than 2 km/h (1.2 mph). When your speed increases to more
than 3 km/h (1.9 mph), the recording continues automatically.
You can turn 

Autopause

 on/off for each sport mode in Movescount

under the advanced settings for the sport mode.
You can also turn 

Autopause

 on/off during exercise without any

effect on your Movescount settings.
To turn 

Autopause

 on/off during exercise:

1. While you are in a sport mode, keep [Next] pressed to access the

options menu.

2. Scroll to 

ACTIVATE

 with [Light Lock] and select with [Next].

3. Scroll to 

Autopause

 with [Start Stop] and select with [Next].

4. Toggle on/off with [Start Stop] or [Light Lock].
5. Keep [Next] pressed to exit.

24

Содержание AMBIT3 PEAK 2.0












































































































































Отзывы:

Нет отзывов