To exercise with general target:
1. Before you start an exercise recording, swipe up or press the lower button and select
Target.
2. Select Duration or Distance.
3. Select your target.
4. Scroll up and start your exercise.
When you have general targets activated, a target gauge is visible on every data display
showing your progress.
You will also receive a notification when you have reached 50% of your target and when your
selected target is fulfilled.
To exercise with intensity target:
1. Before you start an exercise recording, swipe up or press the lower button and select
Intensity zones.
2. Select HR zones, Pace zones or Power zones.
(The options depend on selected sport mode and if you have a power pod paired with the
watch).
3. Select your target zone.
4. Scroll up and start your exercise.
4.4. Battery power management
Your Suunto 9 Peak Pro has a battery power management system that uses intelligent battery
technology to help ensure your watch does not run out of power when you need it most.
Before you start recording an exercise (see 4. Recording an exercise) you see an estimate of
how much battery life you have left in the current battery mode.
There are three predefined battery modes; Performance (default), Endurance and Tour.
Changing between these modes will change the lifetime of the battery but also changes the
performance of the watch.
NOTE: By default, Tour mode disables all HR tracking (both wrist and chest).
Suunto 9 Peak Pro
25
