Sutter Instrument TRIO MP-235, Руководство по эксплуатации

Страница: 11 / 40

9
TRIO MP-235 THREE-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.23 (20190130) (FW V2.2 & 2.3)
1. INTRODUCTION
1.1 Structure of the TRIO MP-235 Documentation Package
The TRIO MP-235 3-Axis Micromanipulator System is comprised of a ROE/controller, a
power adapter, and a TRIO MP-235/M stepper-motor-based electromechanical
micromanipulator. This manual consists of four parts: This chapter, Introduction, which
provides an overview and general description of the TRIO MP-235 system; Chapter 2,
Installation, which describes how to install, set up, and configure all components of the
system; Chapter 3, Operations, which describes how to operate the TRIO MP-235; Chapter 4,
Maintenance, describes how to perform routine and other maintenance of the TRIO MP-235;
and Chapter 5, Reconfiguration, describes the reconfiguration possibilities of the TRIO MP-
235 system.
Figure 1-1. The TRIO MP-235 system
1.2 Components of the TRIO MP-235 System
Carefully remove all components from the shipping container. In addition to this manual, the
following should be included:
ƒ
TRIO MP-235 ROE Rotary Optical Encoder input device with built-in controller and
external power adapter.
ƒ
TRIO MP-235/M electromechanical micromanipulator
TRIO MP-235/M
ELECTROMECHANICAL
MICROMANIPULATOR
TRIO MP-235/E
ROE/CONTROLLER