Suba
sussextaps.com.au
Tapware is to be installed by a Licensed
Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa.
Maximum water temperature is 65 deg.c.
Suba Shower Mixer System
Product code:
Available options:
BSMS
BLSMS
Shower Mixer System
Lever Shower Mixer System
INSTALLATION GUIDE
1
MIXER DRESS KIT
Remove Mixer protective cover.
Using silicone, seal the wall sur face around the Mixer.
Apply a small amount of silicone to the rear of the backplate
prior to mounting onto the wall.
Fit the Handle Body onto the Mixer Car tridge Lever ensure the
Handle is fully engaged.
Secure the Handle Body by tightening the Set screw using the
Allen Key provided (tighten well).
80 mm
Backplate
Finished
Wall Surface
Set
Screw
Handle
Body
Apply Silicone
Masterfit
Apply Silicone
Stud Face
2
HAND SHOWER FIT OFF
Apply a small amount of grease to the O-rings of the fitting.
Carefully fit the Hand Shower Post ensuring the locating pins
align with the Backplate.
Secure the Hand Shower Post by tightening the Set Screw.
Connect the Hand Shower Hose to Post.
To complete installation, oper ate the Mixer (s) checking the
NOGGING
Backplate
Hand Shower Post
Hand Shower
Hose Connection
Hand Held
Shower
Masterfit
Stud Face
Finished
Wall Surface
Set
Screw
O-Rings
-
-
-
-
-
-
-
-
