Design and function
VariFrame – Assembly Instructions
page 16
Figure 7 M6 hex nut – pos. F
Figure 8 M8 x 35 mm countersunk bolt – pos. G
Figure 9 M10 x 20 mm adjustable glide – pos. H
The cross beams (pos. A) and the fixing plates (pos. B) are fastened to the lifting columns using
screws.
The cross beams are connected (pos. A) with each other with raised head screws in the matching
elongated holes (pos. E) and the hex nut (pos. F).
The foot base-Q (pos. C) or foot base-RE (pos. D) are screwed to the bottom end of the lifting
column.
The tabletop is screwed together with the cross beams (pos. A) and the fixing plates (pos. B).
4.2.1
Packaging units and weights
The complete table frame is combined into one packaging unit for individual acceptances. The total
weight of the packaging unit amounts approx. 16 kg here.
IMPORTANT
When handling the packaging units, observe the respective weights of type
VariFrame tabletops. In particular, adhere to applicable regulations, provisions and laws regarding the
lifting and carrying of loads.
