Installation
Adjustment system - Installation Instructions
Page 23
6.3.2
Installing the Lifting Elements
Remove the protective packaging in which the lifting elements are packaged.
Figure 5 Unpacking
Align the workplace as described in the following in order to facilitate the positioning and
installation of the components.
Figure 6 Aligning the workplace (example: legs/lifting elements already mounted here)
The lifting elements consist of a linear spindle actuator, which is installed directly in the aluminum
mounting profile. Thus, these lifting elements can be attached directly to the base frame as legs,
using commercially available connecting elements.
Depending on the requirements of this base frame, two common outer profile versions are
available, which must be specified when ordering this system.
