Design and Function
Adjustment system - Installation Instructions
Page 15
4
Design and Function
4.1
Technical Specifications
Technical specifications - Height Adjustment System
Installation dimensions (Lifting element) SMS-I-40x80
Dimensions outer profile:
40 mm x 80 mm
Groove width:
8 mm
Stroke (L Stroke):
150 mm
200 mm
300 mm
400 mm
Retracted length L
in
:
510 mm
560 mm
660 mm
760 mm
Extended length L
ext
:
660 mm
760 mm
960 mm
1160 mm
Installation dimensions (Lifting element) SMS-B-45x90
Dimensions outer profile:
45 mm x 90 mm
Groove width:
10 mm
Stroke (L Stroke):
150 mm
200 mm
300 mm
400 mm
Retracted length L
in
:
510 mm
560 mm
660 mm
760 mm
Extended length L
ext
:
660 mm
760 mm
960 mm
1160 mm
Controller
Input voltage:
230 V / 50 Hz (2,7 A)
Output rating:
28 VDC 340 VA at 10% ED (1 min one at 25° C)
Standby use:
< 4 W (Standard); <0,4 W (Optional)
Protection class II:
Protective insulation
Performance data
Traversing velocity:
ca. 8 mm/s
ca. 16 mm/s
Max. lifting capacity and holding load per
lifting element:
150 kg
75 kg
Max. lifting capacity and holding load with
4-leg system:
600 kg
300 kg
Duty cycle:
10% (Traversing time 2 min; Break time 18 min)
Protection type
Lifting elements:
IP 40 in accordance with DIN EN 60529
Controller:
IP 40 in accordance with DIN EN 60529
Manual switch:
IP 40 in accordance with DIN EN 60529
Traversing cycles
At least 5,000 cycles in compliance with maintenance
Table 5 Technical Specifications
