Service and maintenance
FixFrame – Assembly Instructions
Page 33
6
Service and maintenance
6.1
General
Observe and follow the general accident prevention guidelines.
Carry out prescribed adjustment, maintenance, and upkeep work according to
schedule.
Replace defective components as quickly as possible.
Only use tools that are in perfect condition.
Keep suitable containers ready for small parts that may have to be disassembled.
Use only original spare parts approved by the manufacturer.
Tighten screw connections that have been loosened after doing maintenance and
service work.
Reattach disassembled protective devices before the first re-commissioning. Make
sure that the protective equipment is functioning properly.
Perform a functional test (test run) after maintenance or repair work.
Check the proper function of all safety and protective devices.
Remove any used tools, screws, aids or other objects from the operational area of
the table base frame.
6.2
Maintenance instructions
6.2.1
Cleaning
WARNING
Risk of sustaining injuries by disregarding the manufacturer’s instructions
The function of the components may be impaired as a result of ignoring the manufacturer’s cleaning
instructions.
Follow all applicable environmental regulations when cleaning.
