Surveon CAM6471LZ, Руководство пользователя, Страница: 96 / 116

95
ATW Mode (Auto Tracing White Balance)
With Auto Tracking White Balance function, the white balance in a scene will be
automatically adjusted while temperature color is changing. The ATW Mode is
suitable for environments with light source having color temperature in the
range roughly from 2500K to 10000K.
One Push
With One Push function, white balance is adjusted and fixed according to the
scene the camera sees at the moment. This function is suitable for light sources
with any kind of color temperature and situations with minimal scene changes
and continuous lighting. Follow the steps below to set the white balance.

Point the camera to the monitoring area.

Select <One Push> in the White Balance setting menu.

Click on the <Trigger> button to adjust the white balance.
NOTE: In this mode, the value of white balance will not change as the
scene or the light source varies. Users might have to re-adjust the white
balance by clicking on the <Trigger> button again when needed.
Manual Mode
In this mode, users can change the White Balance value manually via
specifying R gain and B gain; the range of R/B gain is from 0 to 127.
The following image displays the general color shifts of the scene when different
Rgain / Bgain combinations are applied.
Click on < > to confirm the setting.