Surveon CAM6471LZ Скачать руководство пользователя страница 90

Страница: 90 / 116

9.3.3

Video OCX Protocol

The Video OCX Protocol setting can be found under this path:

Streaming>

Video OCX Protocol

In the <Video OCX protocol> setting page, the administrator can select RTP

over UDP, RTP over RTSP(TCP), RTSP over HTTP or MJPEG over HTTP, for

streaming media over the network. In the case of multicast networking, users

can select the Multicast mode. Click on <Save> to confirm the setting.

Video OCX protocol setting options include:



RTP over UDP / RTP over RTSP(TCP) / RTSP over HTTP / MJPEG

over HTTP



Multicast Mode

Enter all required data, including <Multicast IP address>, <Multicast

H.264-1 / H.264-2 / H.264-3 / H.264-4 Video Port>, <Multicast MJPEG

Video Port>, <Multicast Audio Port> and <Multicast TTL> into each

blank.

Click on <Save> to confirm the setting.

9.3.4

Video Frame Rate

The Video Frame Rate setting can be found under this path:

Streaming> Video

Frame Rate

Video frame rate is for setting the frames per second (fps) if necessary.

MJPEG / H.265 / H.264-1 / H.264-2 / H.264-3 / H.264-4 Frame Rate

The default setting of MJPEG / H.265 / H.264-1 / H.264-2 / H.264-3 / H.264-4

Frame Rate is 30 fps; the setting range is from 1 to 30. The maximum range of

MJPEG / H.265 / H.264-1 / H.264-2 / H.264-3 / H.264-4 Frame Rate will change

according to the selected video resolution on the <Video Format> page.

NOTE:

Low frame rate will decrease video smoothness.

Click on <Save> to confirm the setting.

Содержание CAM6471LZ





















































































































Результаты поиска

Содержание CAM6471LZ

Отзывы:

Surveon CAM6471LZ, Руководство пользователя, Страница: 90 / 116

Результаты поиска

Содержание CAM6471LZ

Отзывы: