35
E N G L I S H
Testing for Continuity
(Figure 6)
Warning
To avoid damages to the Meter or to the
devices under test, disconnect circuit power and
discharge all the high-voltage capacitors before
testing for continuity.
To test for continuity, connect the Meter as below:
1. Insert the red test lead into the
Hz
Ω
terminal
and the black test lead into the
COM
terminal.
2. Set the rotary switch to
and press
BLUE
button to
select measurement mode.
3. The buzzer sounds if the resistance of a circuit under
test is less than around 70
Ω
.
Note:
• The LCD displays OL indicating the circuit being tested
is open.
• When continuity testing has been completed,
disconnect the connection between the testing leads
and the circuit under test, and remove the testing leads
away from the input terminals of the Meter.
D.
Figure 6
