SurfRAID TRITON 16Ni, Руководство пользователя

Страница: 32 / 248

Chapter 4 Internal RAID Configuration Utility Options
Configuration Methods
There are f o ur methods of configuring the internal RAID controller:
a. VT100 terminal connected through the serial Monitor port
b. Front panel LCD control buttons
c. Web browser-based remote RAID management via the R-Link Ethernet port
d. Telnet connection via the R-Link Ethernet port
NOTE: The RAID subsystem allows you to access using only one method at a
time. You cannot use more than one method at the same time. The R-Link
Ethernet port will be needed to support remote notification and is strongly
recommended.
4.1 Configuration through VT100 Terminal
Configuring through a terminal will allow you to use the same configuration options and functions
that are available from the LCD panel and via Telnet. To start-up:
1. Connect the Monitor port located at the rear of the system to another PC or a VT100 compatible
terminal operating in an equivalent terminal emulation mode using serial cable.
NOTE: You may connect a terminal while the system’s power is on.
2. Power-on the terminal.
3. Run the VT100 program or an equivalent terminal program.