With the sprayer removed from the bottle, fill bottle with warm water and soap made for foam cannons (not
included). Use recommended water to soap ratio on the soap label.
1
Pressure Washer Foam Cannon
INSTRUCTION SHEET
ITEM #1150587
MODEL #SGY-PWA83A
www.surfacemaxx.com
Foam Cannon Notes:
1. Attach bottle to sprayer. Turn sprayer “clockwise”
until tight. Do not overtighten.
2. Connect foam cannon to quick connect fitting on
you spray gun or wand.
Note:
Pressure washer should be off during
connection or trigger in locked position.
2. With the pressure washer on, pull the trigger on
pressure washer gun to spray foam.
Note:
Do a test shot away from the object you are
spraying to ensure the foam cannon is attached
properly and you are getting the spray pattern you
want.
ASSEMBLY INSTRUCTIONS
1. The air intake knob adjusts the amount of foam,
turn counterclockwise for more foam and turn
clockwise for less foam.
Do not point foam cannon at people or animals as
it can cause injury.
OPERATING INSTRUCTIONS
CAUTION:
1
1
2
