Surewerx JET MINI-MITE II Series, Руководство оператора

Страница: 5 / 14

5
OPERATION
TO RAISE LOAD:
1. Set change lever on handle to “UP” position.
2. Operate handle to move load.
TO LOWER LOAD:
1. Set change lever on handle to “DOWN” position.
2. Operate handle to move load.
TO ADJUST CHAIN LENGTH:
TO SHORTEN:
Set change lever to “NEUTRAL” and turn feed hand wheel clockwise or pull free end of chain.
TO LENGTHEN:
Set change lever to ”NEUTRAL” and turn feed hand wheel counter-clockwise or pull hook end of chain.
BRAKE LOCK:
If the lever hoist is unloaded by means other than operating the lever, or if the bottom hook is pulled tight against the hoist
body, brake lock can occur. To unlock brake, move selector to DOWN position and pull sharply on lever.
SHOCK LOADS:
Do not allow a load to drop, such as over the edge of a platform, while connected to a lever hoist. The sudden drop, even of
an insignificant distance, can cause a severe momentary overload, seriously damaging the lever hoist and possibly resulting
in the loss of the load. This can occur at loads well under the rated capacity.
REPLACEMENT OF CHAIN:
This lever hoist is equipped with JET’s exclusive class V+ load chain. Class V+ chain is stronger than all other
chains. No other load chain, including other JET load chains, may be substituted. Use of any chain other than JET’s
class V+will result in decreased load capacity, possibly leading to unsatisfactory performance, loss of load, property
damage, and/or injury.
COLD WEATHER USE:
Mini Mite II Lever Chain Hoist capacities are unaffected at temperatures down to -40°C. Standard factory lubrication should
be replaced with low temperature lubricant for use below -30°C.