2021/03/11 08:32
1/5
How to Configure an Alarm Zone
- http://kb.supremainc.com/knowledge/
,
How to Configure an Alarm Zone
Alarm zone has introduced with BioStar 2.5. It is used to detect any attempts of intrusion during an
armed status.
You can trigger the device to make sounds or send a relay on the event of an intrusion.
This is basically something you would turn on at the end of the day after closing your offices and you
would disarm the device when you start work on the next day.
Refer to the bottom of the article to see which devices support this zone.
Note that only local zone with RS485 connection is supported right now. Global zone, which would be
server matching of the zone information is currently unavailable.
The alarm zone can detect intrusion based on the configured input and the sensor of the door is also
used for detecting intrusion.
You can configure various output and sound for the Alarm status. In the Trigger & Action menu you
can configure the zone settings so that an email is sent to the administrator on a specific event.
During an armed status, users will be unable to enter and an attempt to authenticate will be logged
as intrusion alarm access denied. For further information on the types of event logs, please refer to
the knowledge base configuration guide regarding Alarm Zone.
Configuration
1. Add a device to BioStar 2.
2. Add the device to a door.
Refer to door configuration link
