Chapter 7 Configuration Settings
www.supmea.com
24
7.3 Remote transmission setting interface
7.3.1 Communication settings:
Set the address, baud rate and parity bit of 485 communication.
：
Select address digits, baud rate, check digit
：
Optional. Address range (1~254), optional baud rate (2400, 4800, 9600,
19200, 57600), optional check bit (no check, odd check, even check)
：
save setting parameters
：
Back to monitoring interface
：
Return to the remote transmission setting interface
Figure 41
7.3.2 Current transmission:
The engineering value corresponding to 4mA and the engineering value
corresponding to 20mA of (4~20) mA output can be set.
：
select the number of digits to set the parameter data
：
change data size
：
Jump to 20mA parameter setting, save the setting parameters
：
Return to the monitoring interface
：
Return to 4mA parameter setting, return to remote transmission setting
interface
Note: The unit xx and the data size are automatically switched according to the
selected sensor
--Remote Setting--
1.Comm
2.Current Transmission
--Comm--
Address:
Baud Rate:
Parity Bit: No check
