SUPMEA SUP-C703S, Руководство пользователя, Страница: 32 / 36

Chapter 5 Programmable Output
www.supmea.com -21-
5.2 Linear Output Function
Outputs a linear output signal value based on the time you set.

Press or to set the main set value for
output.

Press the wave form button , and the LCD will
display SWEEP. The linear output mode is enabled.

Press the programming button to set the linear
output time parameter (TIME). There are four time to
choose from: ascending time, upper limit holding time,
descending time, and lower limit holding time. Press
or to change the time value (configuration
range: from 0 to 999s).

Press the programming button again to set the
linear output times (COUNT), with a configuration
range from 0 to 999. 0 means infinite times.

Press the yellow source button , and the value of
on the screen will turn from to ,
and the output is started.
 The LCD displays the current output step.
 Press the yellow source button to stop the
output.