Superrollo GW70, Перевод оригинального руководства по эксплуатации и сборке

Страница: 25 / 40

25
EN
13.1 Configuring an opening and closing time
Configure a closing time (
t
)
(e.g. at 20:30 hours)
i
1.
+ Simultaneously briefly press the
buttons.
2.
The automatic LED flashes and the shut-
ter moves to the lower end point.
Your roller shutters will close auto-
matically every day at 20:30.
13.2 Switching the automatic timer on / off
i
If required, the automatic timer can be switched on
or off at any time.
Flashing
After power failure, if at least one
switching time was previously been
configured.
i
In the event of power failure, the switching
times will be extended by the duration of
the power failure, and therefore may require
reconfiguration.
1.
Press and hold the clock button for
approx. 1 second.
2.
Pay attention to the automatic LED.
OFF
Automatic timer OFF
ON
Automatic timer ON