Supero X11SAE, Руководство пользователя

Страница: 101 / 131

Supermicro X11SAE/X11SAE-F Motherboard User’s Manual
4-32
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for
standard serial data communication. Select 2 Stop Bits if slower devices
are used. The options are
1 and 2.
COM2 Flow Control
Use this feature to set the flow control for Console Redirection to prevent
data loss caused by buffer overflow. Send a "Stop" signal to stop sending
data when the receiving buffer is full. Send a "Start" signal to start
sending data when the receiving buffer is empty. The options are
None
and Hardware RTS/CTS.
COM2 VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/
VT100 terminals. The options are Disabled and
Enabled.
COM2 Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as
text messages to a remote server. The options are
Disabled and Enabled.
COM2 Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are
Disabled and
Enabled .
COM2 Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in
Console Redirection for legacy OS support. The options are 80x24 and
80x25 .
COM2 Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which
is a terminal emulator designed for the Windows OS. The options are
VT100 , LINUX, XTERMR6, SCO, ESCN, and VT400.
COM2 Redirection After BIOS Post
Use this feature to enable or disable legacy Console Redirection after
BIOS POST. When set to Bootloader, legacy Console Redirection is
disabled before booting the OS. When set to Always Enable, legacy
Console Redirection remains enabled when booting the OS. The options
are
Always Enable and Bootloader.
BMC SOL
COM3 Console Redirection