Supero SC835 Chassis Series, Руководство пользователя

Страница: 29 / 66

5-7
Chapter 5: Chassis Setup
Figure 5-5: Installing the Motherboard
Motherboard Installation
Installing the Motherboard
Review the documentation that came with your motherboard. Become familiar 1.
with component placement, requirements, and precautions.
Confirm that the power supply is disconnected and lay the chassis on a flat 2.
surface.
Open the chassis cover. 3.
Remove any packaging from the chassis. If the rear fans (set of two fans 4.
nearest the I/O slots) or the air shroud is in place, remove them.
If required by your motherboard, install standoffs in any areas that do not 5.
have a permanent standoff. To do this, tighten a hexagonal optional standoff
into the chassis.
Lay the motherboard on the chassis aligning the permanent and optional 6.
standoffs.
Secure the motherboard to the chassis using the rounded, Phillips head 7.
screws. Do not exceed eight lbs of torque when tightening down the mother-
board
Secure the CPU(s) and heatsinks to the motherboard 8.