Supero C7B250-CB-ML, Руководство пользователя

Страница: 85 / 121

Chapter 4: BIOS
4-19
Flow Control
Use this feature to set the flow control for Console Redirection to pre -
vent data loss caused by buffer overflow. Send a "Stop" signal to stop
data sending when the receiving buffer is full. Send a "Start" signal
to start data sending when the receiving buffer is empty. The options
are
None, Hardware RTS/CTS, and Software Xon/Xoff.
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits
System Agent (SA) Configuration
The following will be displayed:
•
SA PCIe Code Version
•
VT-d Capability
PEG Port Configuration
PEG 0:1:0
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and
Auto .