background image

User's Guide Revision 1.0a
Release Date: December 30, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not 

copy any part of this document.
Information in this document is subject to change without notice. Other products and companies 

referred to herein are trademarks or registered trademarks of their respective companies or mark 

holders.
Copyright © 2014 by Super Micro Computer, Inc. 

All rights reserved. 

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.  

The vendor assumes no responsibility for any inaccuracies that may be contained in this document, 

and makes no commitment to update or to keep current the information in this user's guide, or to 

notify any person or organization of the updates. 

Please Note: For the most up-to-date version 

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product 

described in this user's guide at any time and without notice. This product, including software and 

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a 

license. Any use or reproduction of this product is not allowed, except as expressly permitted by 

the terms of said license. 
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, 

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE 

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF 

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. 

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED 

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, 

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of 

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara 

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for 

all claims will not exceed the price paid for the hardware product.  

FCC Statement: This equipment has been tested and found to comply with the limits for a Class 

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful 

interference with radio communications. Operation of this equipment in a residential area is likely 

to cause harmful interference, in which case you will be required to correct the interference at your 

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate 

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate 

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.   

         

WARNING: Handling of lead solder materials used in this 

product may expose you to lead, a chemical known to 

the State of California to cause birth defects and other 

reproductive harm. 

            AOC-STGN-i2S Add-on Card User's Guide

ii

Содержание AOC-STGN-i2S


















Отзывы: