S
UPERMICR
R
C
ONTACT
I
NFORMATION
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: ftp://ftp.supermicro.com/CDR_Images/CDR-X11-UP/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2015 Supermicro Computer Inc.
All rights reserved. Reproduction of this document whether in part or in whole is strictly pr
ohibited without Supermicro's written
consent.
All T
rademarks are property of their respective entities.
All information provided is deemed accurate at the time of
printing; however
, it is not guaranteed.
P
ACKAGE
C
ONTENTS
X11SSW-F
Q
UICK
R
EFERENCE
G
UIDE
1.00
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
• One (1) Quick Reference Guide
• Website: www.supermicro.com
• General Information: [email protected]
• Technical Support: [email protected]
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
F
OR
YOUR
SYSTEM
TO
WORK
PROPERLY
,
PLEASE
DOWNLOAD
APPROPRIATE
DRIVERS
/
IMAGES
/
USER
'
S
MANUAL
FROM
THE
LINKS
BELOW
:
MNL-1784-QRG R
EV
. 1.00
Connectors
DIMM Memory Installation
Jumpers and Connectors
Back Panel I/O Connectors
Memory Support
Motherboard Layout and Features
Jumpers
CPU Installation
Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
= mounting hole
Heatsink Installation
Front Panel Control (JF1)
LED Indicators
B
J
C
E
F
G
LED Indicators
Jumper
Description
Default
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
Clear CMOS
See Chpt. 2 in User Manual
JI
2
C1/JI
2
C2
SMB to PCI Slots
Pins 2-3 (Disabled)
JPB1
BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/LAN2 Enable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Enable
Pins 1-2 (Reset)
Connector
Description
BT1
Onboard Battery
COM1/COM2
COM1/COM2 Port Headers
Fan1-Fan6
System/CPU Fan Headers
IPMI_LAN
IPMI_Dedicated Gigabit (RJ45) Port
I-SATA2-I-SATA7
SATA 3.0 Connectors via Intel PCH (6Gb/s)
I-SGPIO 1/2
Serial_Link General Purpose I/O Connection Headers for I-SATA 3.0 connections
(I-SGPIO1 for I-SATA2-3, I-SGPIO2 for I-SATA4-7)
J23
M.2 Socket 3 (supports 2260, 2280, 22110 for NVMe and SATA SSD)
JD1
Speaker/Power LED Indicator
JF1
Front Panel Control Header
JIPMB1
4-pin External BMC I
2
C Header (for an IPMI Card)
JL1
Chassis Intrusion Header
JOH1
Overheat LED Indicator
JPI
2
C1
Power I
2
C System Management Bus (Power SMB) Header
JPWR1
24-pin ATX Main Power Connector (Required)
JPWR2
+12V 8-pin CPU Power Connector (Required)
JSD1/JSD2
SATA Disk On Module (DOM) Power Connectors
JSTBY1
Standby Power Header
JSXB1A/1B/1C
SMC-Proprietary WIO_L (Left) Add-On Card Slot
JSXB2
SMC-Proprietary WIO_R (Right) Add-On Card Slot
JTPM1
Trusted Platform Module (TPM)/Port 80 Connector
JUIDB1
UID (Unit Identifi cation) Switch
LAN1/LAN2
Gigabit (RJ45) LAN Ports
SP1
Internal Speaker/Buzzer
USB 0/1
Back Panel USB 2.0 Ports
USB 2/3
USB 2.0 Header
USB 4/5
USB 2.0 Header
USB 6/7
Back Panel USB 3.0 Ports
USB 8
USB 3.0 Type-A Header
USB 9/10
Front Panel Accessible USB 3.0 Header
VGA
Back Panel VGA Port
Power Button
1
NIC1 Link LED
Reset Button
2
HDD LED
FP PWRLED
Reset
PWR
3.3 V
ID_UID_SW/3.3V Stdby
Ground
Ground
19
20
Power Fail LED
NIC2 Link LED
NIC2 Active LED
NIC1 Active LED
X
X
NMI
Ground
Red+ (Blue LED Cathode)
Blue+ (OH/Fan Fail/UID LED)
3.3V
LED
Description
Color/State
Status
LE1
Rear UID LED
Blue: On
Unit Identifi ed
LEDBMC
BMC Heartbeat LED
Green: Blinking
BMC Normal
LEDEC1
EC Heartbeat LED
Green: Blinking
EC Normal
LEDPWR
System Standby Power LED
Green: Solid On
Power On
I/O Back Panel
A. COM 1
D. IPMI LAN
G. LAN1
J. UID Switch
B. USB Port 0 (2.0)
E. USB Port 6 (3.0)
H. LAN2
C. USB Port 1 (2.0)
F. USB Port 7 (3.0)
I. VGA
A
D
I
H
Memory Population Guidelines
Please follow the table below when populating the X11SSW-F:
Insert the desired number of DIMMs into the memory slots. The DIMM slots
should be populated in the following order: DIMMB2, DIMMA2, DIMMB1,
DIMMA1. For the system to work properly, please use memory modules of the
same type and speed in the motherboard.
Channel A Slot 1
Channel A Slot 2
(Blue Slot)
Channel B Slot 1
Channel B Slot 2
(Blue Slot)
Towards the CPU
Notches
Release Tabs
Press both notches
straight down into
the memory slot.
Memory Module Population
DIMM Slots
per Channel
DIMM Type
POR Speeds
(MHz)
Ranks per
DIMM
Layer
Count
FW Base
Supported
Voltage
2
Unbuffered
DDR4 ECC
2133, 1866,
1600, 1333
SR, DR
6
SPS
1.2V
The X11SSW-F has four (4) 288-pin DIMM slots that support up to 64GB of SDRAM
72-bit DDR4 unbuffered ECC 2133/1866/1600/1333MHz memory.
Turn Clockwise
to Lock
Thermal Paste
Push Down
Turn Counter-
clockwise to
Unlock
Connect the Heatsink Wire to
the CPU Fan Connector
CPU Properly
Installed
Load Lever Locked
into Place
Load Lever
Load Plate
Pin 1
North Center Edge
LAN2
LAN1
USB0/1
USB6/7
(3.0)
VGA
SP1
CPU
BIOS
LICENSE
MAC CODE
BAR CODE
IPMI CODE
IPMI_L
COM1
BT1
COM2
USB2/3
USB8(3.0)
J23
USB4/5
USB9/10(3.0)
JTPM1
JPWR1
JOH1
JPI2C1
LEDPWR
JD1
JPWR2
FAN1
FAN2
FAN3
FAN4
FAN5
FAN6
JF1
I-SGPIO2
I-SGPIO1
JL1
I-SA
T
A
3
I-SA
T
A
2
JSD1 JSD2
JSXB1C
JSXB1B
JSXB2
JSXB1A
JI2C1
JI2C2
JWD1
JPL2
JPG1
JPB1
JPME2
JBR1
LE1
JBT1
LEDEC1
LEDBMC
JPL1
I-SA
T
A
7
I-SA
T
A
6
I-SA
T
A
4
I-SA
T
A
5
SRW2
SRW3
SRW1
SRW4
BMC
X11SSW-F
REV:1.01
Designed in the USA
JIPMB1
JSTBY1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
2260
2280
22110
JUIDB1
Intel PCH