Supermicro X11SRL-F, Руководство пользователя

Страница: 29 / 121

29
Chapter 2: Installation
2.4 Memory Support and Installation
Note : Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to pre-
vent any possible damage.
Memory Support
The X11SRL-F supports up to 512GB of RDIMM and 1TB of LRDIMM DDR4 (288-pin) ECC
memory with speeds of up to 2933 MHz in eight memory slots.
Refer to the tables below for
the recommended DIMM population order and additional memory information.
1 CPU, 4-DIMM Slots
Number of DIMMs Memory Population Sequence
1 DIMMA1
2 DIMMA1 / DIMMB1
3
(Unbalanced: not recommended)
DIMMA1 / DIMMB1 / DIMMC1
4 DIMMA1 / DIMMB1 / DIMMC1 / DIMMD1
5
(Unbalanced: not recommended)
DIMMA1 / DIMMB1 / DIMMC1 / DIMMD1 / DIMMA2
6 DIMMA1 / DIMMB1 / DIMMC1 / DIMMD1 / DIMMA2 / DIMMB2
7
(Unbalanced: not recommended)
DIMMA1 / DIMMB1 / DIMMC1 / DIMMD1 / DIMMA2 / DIMMB2 / DIMMC2
8 DIMMA1 / DIMMB1 / DIMMC1 / DIMMD1 / DIMMA2 / DIMMB2 / DIMMC2 / DIMMD2
DIMM Type
Ranks Per DIMM
and Data Width
DIMM Capacity
(GB)
Speed (MT/s), Voltage (V),
Slot Per Channel (SPC),
and DIMMs Per Channel (DPC)
2 Slots Per Channel
DRAM Density 1DPC 2DPC
4Gb 8Gb 16Gb 1.2V 1.2V
RDIMM SRx4 8GB 16GB 16GB
2933 MHz* 2666 MHz
RDIMM SRx8 4GB 8GB 32GB
RDIMM DRx8 8GB 16GB 32GB
RDIMM DRx4 16GB 32GB 64GB
LRDIMM QRx4 32GB 64GB 128GB
Notes:
1. 16Gb density DRAM module is supported by Intel Xeon W-2200 series processors.
2. DDR4-2933MHz memory speed support is available with selected Intel Xeon W-2200 series processors.