Supermicro X11DPT-L, Руководство пользователя

Страница: 35 / 170

35
Chapter 2: Installation
IPMI CODE
C A
1
BIOS
LICENSE
DESIGNED IN USA
MAC CODE
X1
1DPT
-L
REV
: 1.01
CM P/N
BAR CODE
P1-DIMMB1 P1-DIMMA1
CPU1
CPU2
PCH
BMC
LAN
CTRL
LAN
CTRL
SXB1
JF1
JTPM1
LE1
JBT1
JSD2
JSD1
JPME2
JWD1
JIPMB1
LEDM1
BT1
USB0/1(3.0)
PCH PCI-E 3.0 x4 I-SA
TA0~5
I-SATA7
I-SATA6
CPU1 SLOT1 PCI-E 3.0 x16
COM1
UID
IPMI_LAN LAN1 LAN2 VGA
P2-DIMMA1 P2-DIMMB1
P2-DIMME1 P2-DIMMD1
P1-DIMMD1 P1-DIMME1
DIMM Installation
1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMD1, P1-
DIMMB1, and P1-DIMME1. For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing below.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
Release Tabs
Notches
Insert the DIMM module into the memory slot.