S
UPERMICR
R
C
ontaCt
I
nformatIon
M
N
L-
14
84
-Q
R
G
• www.supermicro.com (Email: [email protected])
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: ftp://ftp.supermicro.com
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2012 Supermicro Computer Inc.
All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's wri
tten
consent.
All T
rademarks are property of their respective entities.
All information provided is deemed accurate at t
he time of printing; however
, it is not guaranteed.
P
aCkage
C
ontents
(a
PPlIes
t
o
a
n
I
dIvIdual
P
aCk
o
nly
)
X10sla-f
Q
uICk
r
eferenCe
g
uIde
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
Connector
Description
Battery
Onboard Battery
COM1/COM2
COM1/COM2 Port Headers
Fan1 - Fan4, FanA
System/CPU Fan Headers (Fan1: CPU Fan)
JF1
Front Panel Control Header
JL1
Chassis Intrusion Header
JLED1
Power LED Indicator Header
JP1
2
C1
Power SMB (System Management Bus)
JPW1
24-pin ATX Main Power Connector (Required)
JPW2
+12V 8-pin CPU power Connector (Required)
JSD1
SATA DOM (Device_On_Module) Power Connector
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
LAN1/LAN2
Gigabit (RJ45) Ports (LAN1/2)
IPMI_LAN
IPMI_Dedicated LAN
SPKR1
Internal Speaker/Buzzer
I-SATA0/I-SATA1
(Intel PCH) Serial ATA (SATA 3.0) Ports 0/1 (6Gb/sec)
I-SATA 2 - I-SATA5
(Intel PCH) Serial ATA (SATA 2.0) Ports 2~5 (3Gb/sec)
(PCH) Slot 7
PCI-Express 2.0 x4 in x8 Slot
(CPU) Slot 6
PCI-Express 3.0 x16 Slot
Slot 1 - Slot 5
PCI 33MH Slots (5V)
SW1
UID (Unit Identifier) Switch
T-SGPIO 1/2
Serial_Link General Purpose I/O Connection Headers 1/2
USB 2, 3, 4, 5
Backpanel USB 2.0 Ports 2, 3, 4, 5
USB 0 (3.0), USB 1 (3.0)
Front Accessible USB 3.0 Ports 1, 2
USB 8/9
Front Panel Accessible USB 2.0 Headers 8/9
VGA
Backpanel VGA Port
LED
Description
Color/State
Status
LE3
Onboard Standby Power LED
Green: Solid on
Power On
LE4
UID LED
Blue: On
Unit Identified
LE5 (X10SLA-F Only)
BMC Heartbeat LED
Green: Blinking
BMC Normal
Jumper
Description
Default
JBT1
CMOS Clear
(See Chpt. 2)
JI
2
C1/JI
2
C2
Disable SMB to PCI Slots
Pins 2-3 (Disabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/LAN2 Enable
Pins 1-2 (Enabled)
JPME1
ME Recovery
Pins 1-2 (Normal)
JPME2
Manufacture Mode Select
Pins 1-2 (Normal))
JPUSB1
USB Wake Up Enable
Pins 1-2 (Enabled)
JWD1
Watch Dog Enable
Pins 1-2 (Reset)
LED Indicators
Connectors
DIMM Memory Installation
Jumpers, Connectors and LED Indicators
Back Panel I/O Connectors
Memory Support
Motherboard Layout and Features
Jumpers
Note
: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.
Note
: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note:
Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
= mounting hole
Front Panel Control (JF1)
IPMI CODE
BIOS
LICENSE
BAR CODE
MAC CODE
FA
N2
FA
N4
FA
N1
FA
NA
JLED
1
JWD1
JPG1
JPME1
JPME2
JPL2
JPL1
JPUSB1
J19
J18
LE3
LE5
LE
4
JPW1
JPW2
J2
1
JI2C1
JI2C2
JL
1
JPI2C1
JTPM
1
T-SGPIO1
JSD1
JSTBY1
SPKR1
USB4/5
JF
1
SW1
SLOT5 PCI 33MHZ
SLOT4 PCI 33MHZ
SLOT3 PCI 33MHZ
SLOT2 PCI 33MHZ
USB1(3.0)
USB0(3.0)
COM2
USB8/9
_LAN
IPMI
VGA
COM1
LAN2
LAN1
DIMMB
2
DIMMA
2
CPU SLOT6 PCI-E 3.0 X1
6
CPU
X10SLA(-F)
USB2/3
I-SATA3
I-S
AT
A4
I-SATA2
I-SATA1
I-SATA0
I-SATA5
SLOT1 PCI 33MHZ
PCH SLOT7 PCI-E 2.0 X4(IN X8
)
DIMMB
1
DIMMA
1
T-SGPIO2
BIOS
Rev. 1.01
Battery
PCH
BMC
FA
N3
JBT1
D
F
A
C
B
E
G H
I
J
Backplane I/O Panel
A. COM1
F. USB Port 4 (2.0)
B. USB Port 3 (2.0)
G. LAN1
C. USB Port 2 (2.0)
H. LAN2
D. IPMI_LAN
I. VGA
E. USB Port 5 (2.0)
J. UID Switch
Power Button
Blue+ (OH/Fan Fail/
PWR FaiL/UID LED)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
ID_UID_SW/3/3V Stby
Red+ (Blue LED Cathode)
Ground
Ground
19
20
3.3V
X
Ground
NMI
X
NIC2 Link LED
NIC2 Activity LED
NIC1 Activity LED
CPU Installation
CPU Properly
Installed
Load Lever Locked
into Place
Turn Clockwise
to Lock
Heatsink Installation
Thermal Paste
Push Down
Turn Counter-
clockwise to
Unlock
Connect the Heatsink Wire to
the CPU Fan Connector
The X10SLA(-F) supports up to 32GB of Unbuffered (UDIMM) DDR3 ECC/Non-
ECC 1600/1333 MHz in 4 memory slots.
Memory Population Guidelines
Please follow the table below when populating the X10SLA(-F).
DDR3 Unbuffered ECC/Non-ECC (UDIMM) Memory
DIMM Slots per
Channel
DIMMs Populat-
ed per Channel
DIMM Type
POR Speeds
Ranks per DIMM (any
combination)
2
1
Unbuffered
DDR3
1333, 1600
Single Rank, Dual Rank
2
2
Unbuffered
DDR3
1333, 1600
Single Rank, Dual Rank
Insert the desired number of DIMMs into the memory slots, starting with DIMMA1
(Channel A, Slot 1). For the system to work properly, please use the memory
modules of the same type and speed in the same motherboard.
Channel A Slot 1
Channel A Slot 2
(Blue Slot)
Channel B Slot 1
Channel B Slot 2
(Blue Slot)
Towards the CPU
Notches
Release Tabs
Press both notches
straight down into
the memory slot.
Load Lever
Load Plate
Pin 1
Tools Needed:
Screwdriver
Phillips Screws (9) Standoffs (9)
North Center Edge
