Supermicro SuperServer 8028B-C0R3FT, Руководство пользователя

Страница: 13 / 142

Chapter 1: Introduction
1-3
Onboard Controllers/Ports
The color-coded I/O ports on the X10QBL-(CT) include two COM ports (one header
and one port), a VGA (monitor) port, six USB 2.0 ports (includes three (3) rear access
I/O panel, two (2) dual port connectors and one (1) Type-A connection for the two
front panel ports), two gigabit Ethernet ports and one dedicated IPMI LAN port.
Note 1: For more information on IPMI configuration, please refer to the IPMI User's
Guide posted on our website at http://www.supermicro.com/support/manuals/
Graphics Controller
The X10QBL-(CT) features an integrated ASpeed AST2400 BMC (Baseboard
Controller) for a graphics controller.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, auto-switching voltage regulators, chassis and CPU overheat sensors,
ACPI/ACPM power management, PECI (Platform Environment Configuration
Interface) 2.0 support, AC power loss recovery, Wake-on-Ring (WOR) & Wake-
on-LAN (WOL) support, Main switch override mechanism, Intel
®
Intelligent Power
Node Manager 3.0, CPU Thermal Trip support, Fan status monitoring via IPMI
connections. Pulse Width Modulation (PWM) fan control, UID (Unit Identification)/
Remote UID, APM 1.2, ACPI 3.0/4.0, USB keyboard, Plug & Play (PnP), BIOS
rescue hotkey, riser card auto-detection, RTC (Real-Time Clock) wake-up, PCI
Firmware 3.0, SPI dual/quad speed support, and SMBIOS 2.7 & later and virus
protection and BIOS rescue.
1-3 Server Chassis Features
The SuperServer 8028B-TR3F/C0R3FT is built upon the SC828TS-R1K43LPB
chassis. Details on the chassis and on servicing procedures can be found in
Chapter 6. The following is a general outline of the main features of the chassis.
System Power
The SC828TS-R1K43LPB chassis features two 1400 Watt power supply modules.
The system will shut down when a power supply fails, requiring the replacement
and removal of the failing power supply module.
Note: The SC828 chassis power supplies are NOT redundant, hot-plug power
supplies.